GLYDE Halloween skeleton glidebait

GLYDE - HALLOWEEN

$49.99
/
Los gastos de envío se calculan en la pantalla de pagos.

LIMITED EDITION · Halloween Release

The bones are back from the deep. For Halloween, the JYG Pro Fishing GLYDE trades its natural patterns for a skeleton costume, this pattern is a limited release for the spooky season. Once it's gone, it's gone.

Key Features

  • Wire-through head section
  • 400# rated swiveling hook hangers
  • 250# rated stainless steel hardware
  • Extra-tough silicone tail
  • BKK Viper 1/0 treble hooks
  • Fully tunable — removable pin and adjustable eyelets
  • Pocket pack for easy storage and transport

Specifications

  • Length: 8"
  • Weight: ~3oz
  • Action: Glide — chop, glide, slow roll, burn, twitch
  • Rigging: Rigged (BKK Viper 1/0 trebles)
  • Water Type: Saltwater — freshwater-convertible
  • Construction: Resin — hand-poured, hand-built

Color: Halloween Skeleton — Limited Edition (8" / ~3oz)

Tuning: Comes saltwater-ready with BKK Viper 1/0 hooks. Swap to lighter-gauge hooks to slow the sink rate for freshwater use.

Trick or treat? The fish don't get to choose. 💀🎃

Prop 65 Warning CA

The GLYDE is a full resin glide bait built in two sections, 8 inches and 3 ounces. It comes tuned out of the package to chop, glide, and swim. Other glide baits need further tuning to chop, glide, or swim better.

Fished in fresh and salt. Slow sink in saltwater, and it pauses on a burn-and-stop like a lifelike fish. Freshwater sinks it faster, and lighter gauge hooks slow the sink rate if desired. Lighter hooks are not included.

Salt and fresh baitfish patterns. Designed, painted, and assembled in Jupiter, Florida.

  • Fully tunable. The pin joining the two sections pulls out and the tail section comes off, and the eyebolts thread in or out to change the gap between them. That sets the maximum swing angle of the tail section — opened up for a longer glide, closed down for a tighter chop.
  • Wire-through head section.
  • 400# rated swiveling hook hangers.
  • 250# rated stainless steel hardware.
  • Extra-tough silicone tail.
  • Pocket pack makes storage and transport easy.

Type: Two-section glide bait

Sizes: One size

Length: 8"

Weight: 3 oz

Body: Full resin

Hook hangers: 400# rated, swiveling

Hardware: 250# rated stainless steel

Hooks: BKK Viper 1/0 trebles

Water rating: Saltwater rated, fished in fresh and salt

Tuned out of the package to do all three. Chop, glide, and swim, with no adjustment needed first.

Adjustable when it's wanted. The eyebolts set the swing angle toward a longer glide or a tighter chop.

Fully tunable. Removable pin and adjustable eyebolts.

Fresh and salt. Saltwater rated hardware, with a hook change to set the sink rate in fresh.

Spare parts

Keep spares on deck, or swap colors to change the look.

GLYDE Eyes Replacement 4-packColor: GREEN $2.99
GLYDE Tail Replacement 2-packColor: BROWN $4.99
8" / 3 oz
Length / Weight
15
Color patterns
250#
Stainless hardware
400#
Swiveling hook hangers

HOW TO TUNE YOUR GLYDE

Step one

Pull the pin

Step one

Pull the pin

The pin runs through the joint and holds the two resin sections together. It is meant to come out: with the tail section off, the eyebolts are exposed and the whole tune happens from there. The pin goes back in the same way when you are done.

Step two

Turn the eyebolts

Step two

Turn the eyebolts

The eyebolts set the gap between the two sections, and the gap sets how far the tail section can swing. Turned in, the bait glides wide with hang time between turns. Backed out, it walks tight and quick. Turn both eyebolts the same amount, a half turn at a time.

Step three

Get bit

Step three

Get bit

Drop the pin back in and fish it. The GLYDE leaves the pack already tuned to chop, glide and swim, so this is not about fixing anything — it is about moving it toward one of the three.

In saltwater it sinks slowly and pauses on a burn-and-stop like a lifelike fish. Freshwater sinks it faster; lighter gauge hooks slow the sink rate back down if desired.

Pro tip

Count your half turns

Pro tip

Count your half turns

The count of half turns is the only record of a tune. Written down, a setup that worked on a given day takes a minute to rebuild. Without it, finding that same walk again means starting from the beginning.

Common questions

Questions we get about the GLYDE.

If yours is not here, call or text us and we will answer it.

Does the GLYDE come ready to fish?

Yes. Every GLYDE ships rigged with BKK Viper 1/0 trebles and already dialed in for chop, glide and swim. The eyebolts are there for when you want something different, not because the bait needs fixing.

What does turning the eyebolts actually change?

How far the tail section can swing. Turned in, the bait glides wide with hang time between turns. Backed out, it walks tight and quick. Work in half turns, the same amount on both eyebolts. The joint never locks solid, which is what keeps the bait alive on the pause.

Can I get it back to the way it arrived?

Count your half turns on the way out and reverse them on the way back.

Can I fish it in freshwater?

It comes saltwater-ready, where the resin body sinks slowly on the pause. In freshwater the same bait sinks faster, so lighter-gauge hooks bring the sink rate back down if desired.

What rod does it want?


Three ounces on an eight-inch body needs a rod with enough tip to move the bait and enough backbone to drive a treble home. The Revolution Inshore 8'0" casting rod, rated 20–40 lb, does both.

Is the tail replaceable?

Yes. The tail is extra-tough silicone and comes off the bait without tearing.

Still have questions? Call or text +1 561 254-9020.